view Documentation/IRQ.txt @ 452:c7ed6fe5dca0

kexec: dont initialise regions in reserve_memory()

There is no need to initialise efi_memmap_res and boot_param_res in
reserve_memory() for the initial xen domain as it is done in
machine_kexec_setup_resources() using values from the kexec hypercall.

Signed-off-by: Simon Horman <horms@verge.net.au>
author Keir Fraser <keir.fraser@citrix.com>
date Thu Feb 28 10:55:18 2008 +0000 (2008-02-28)
parents 831230e53067
line source
1 What is an IRQ?
3 An IRQ is an interrupt request from a device.
4 Currently they can come in over a pin, or over a packet.
5 Several devices may be connected to the same pin thus
6 sharing an IRQ.
8 An IRQ number is a kernel identifier used to talk about a hardware
9 interrupt source. Typically this is an index into the global irq_desc
10 array, but except for what linux/interrupt.h implements the details
11 are architecture specific.
13 An IRQ number is an enumeration of the possible interrupt sources on a
14 machine. Typically what is enumerated is the number of input pins on
15 all of the interrupt controller in the system. In the case of ISA
16 what is enumerated are the 16 input pins on the two i8259 interrupt
17 controllers.
19 Architectures can assign additional meaning to the IRQ numbers, and
20 are encouraged to in the case where there is any manual configuration
21 of the hardware involved. The ISA IRQs are a classic example of
22 assigning this kind of additional meaning.