ia64/linux-2.6.18-xen.hg

view scripts/kconfig/Makefile @ 798:b02a90bf5bbc

ACPI: Backport missing part for T-State MSR support

Part of below kernel commit was missed while packporting T-State
support.

commit f79f06ab9f86d7203006d2ec8992ac80df36a34e
Author: Zhao Yakui <yakui.zhao@intel.com>
Date: Thu Nov 15 17:06:36 2007 +0800

ACPI: Enable MSR (FixedHW) support for T-States

Add throttling control via MSR when T-states uses
the FixHW Control Status registers.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Signed-off-by: Wei Gang <gang.wei@intel.com>
author Keir Fraser <keir.fraser@citrix.com>
date Mon Mar 02 10:53:59 2009 +0000 (2009-03-02)
parents 831230e53067
children
line source
1 # ===========================================================================
2 # Kernel configuration targets
3 # These targets are used from top-level makefile
5 PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
7 xconfig: $(obj)/qconf
8 $< arch/$(ARCH)/Kconfig
10 gconfig: $(obj)/gconf
11 $< arch/$(ARCH)/Kconfig
13 menuconfig: $(obj)/mconf
14 $(Q)$(MAKE) $(build)=scripts/kconfig/lxdialog
15 $< arch/$(ARCH)/Kconfig
17 config: $(obj)/conf
18 $< arch/$(ARCH)/Kconfig
20 oldconfig: $(obj)/conf
21 $< -o arch/$(ARCH)/Kconfig
23 silentoldconfig: $(obj)/conf
24 $< -s arch/$(ARCH)/Kconfig
26 update-po-config: $(obj)/kxgettext
27 xgettext --default-domain=linux \
28 --add-comments --keyword=_ --keyword=N_ \
29 --files-from=scripts/kconfig/POTFILES.in \
30 --output scripts/kconfig/config.pot
31 $(Q)ln -fs Kconfig_i386 arch/um/Kconfig_arch
32 $(Q)for i in `ls arch/`; \
33 do \
34 scripts/kconfig/kxgettext arch/$$i/Kconfig \
35 | msguniq -o scripts/kconfig/linux_$${i}.pot; \
36 done
37 $(Q)msgcat scripts/kconfig/config.pot \
38 `find scripts/kconfig/ -type f -name linux_*.pot` \
39 --output scripts/kconfig/linux_raw.pot
40 $(Q)msguniq --sort-by-file scripts/kconfig/linux_raw.pot \
41 --output scripts/kconfig/linux.pot
42 $(Q)rm -f arch/um/Kconfig_arch
43 $(Q)rm -f scripts/kconfig/linux_*.pot scripts/kconfig/config.pot
45 PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig
47 randconfig: $(obj)/conf
48 $< -r arch/$(ARCH)/Kconfig
50 allyesconfig: $(obj)/conf
51 $< -y arch/$(ARCH)/Kconfig
53 allnoconfig: $(obj)/conf
54 $< -n arch/$(ARCH)/Kconfig
56 allmodconfig: $(obj)/conf
57 $< -m arch/$(ARCH)/Kconfig
59 defconfig: $(obj)/conf
60 ifeq ($(KBUILD_DEFCONFIG),)
61 $< -d arch/$(ARCH)/Kconfig
62 else
63 @echo *** Default configuration is based on '$(KBUILD_DEFCONFIG)'
64 $(Q)$< -D arch/$(ARCH)/configs/$(KBUILD_DEFCONFIG) arch/$(ARCH)/Kconfig
65 endif
67 %_defconfig: $(obj)/conf
68 $(Q)$< -D arch/$(ARCH)/configs/$@ arch/$(ARCH)/Kconfig
70 # Help text used by make help
71 help:
72 @echo ' config - Update current config utilising a line-oriented program'
73 @echo ' menuconfig - Update current config utilising a menu based program'
74 @echo ' xconfig - Update current config utilising a QT based front-end'
75 @echo ' gconfig - Update current config utilising a GTK based front-end'
76 @echo ' oldconfig - Update current config utilising a provided .config as base'
77 @echo ' randconfig - New config with random answer to all options'
78 @echo ' defconfig - New config with default answer to all options'
79 @echo ' allmodconfig - New config selecting modules when possible'
80 @echo ' allyesconfig - New config where all options are accepted with yes'
81 @echo ' allnoconfig - New config where all options are answered with no'
83 # ===========================================================================
84 # Shared Makefile for the various kconfig executables:
85 # conf: Used for defconfig, oldconfig and related targets
86 # mconf: Used for the mconfig target.
87 # Utilizes the lxdialog package
88 # qconf: Used for the xconfig target
89 # Based on QT which needs to be installed to compile it
90 # gconf: Used for the gconfig target
91 # Based on GTK which needs to be installed to compile it
92 # object files used by all kconfig flavours
94 hostprogs-y := conf mconf qconf gconf kxgettext
95 conf-objs := conf.o zconf.tab.o
96 mconf-objs := mconf.o zconf.tab.o
97 kxgettext-objs := kxgettext.o zconf.tab.o
99 ifeq ($(MAKECMDGOALS),xconfig)
100 qconf-target := 1
101 endif
102 ifeq ($(MAKECMDGOALS),gconfig)
103 gconf-target := 1
104 endif
107 ifeq ($(qconf-target),1)
108 qconf-cxxobjs := qconf.o
109 qconf-objs := kconfig_load.o zconf.tab.o
110 endif
112 ifeq ($(gconf-target),1)
113 gconf-objs := gconf.o kconfig_load.o zconf.tab.o
114 endif
116 clean-files := lkc_defs.h qconf.moc .tmp_qtcheck \
117 .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c
118 subdir- += lxdialog
120 # Needed for systems without gettext
121 KBUILD_HAVE_NLS := $(shell \
122 if echo "\#include <libintl.h>" | $(HOSTCC) $(HOSTCFLAGS) -E - > /dev/null 2>&1 ; \
123 then echo yes ; \
124 else echo no ; fi)
125 ifeq ($(KBUILD_HAVE_NLS),no)
126 HOSTCFLAGS += -DKBUILD_NO_NLS
127 endif
129 # generated files seem to need this to find local include files
130 HOSTCFLAGS_lex.zconf.o := -I$(src)
131 HOSTCFLAGS_zconf.tab.o := -I$(src)
133 HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -ldl
134 HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
136 HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
137 HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
138 -D LKC_DIRECT_LINK
140 $(obj)/qconf.o: $(obj)/.tmp_qtcheck
142 ifeq ($(qconf-target),1)
143 $(obj)/.tmp_qtcheck: $(src)/Makefile
144 -include $(obj)/.tmp_qtcheck
146 # QT needs some extra effort...
147 $(obj)/.tmp_qtcheck:
148 @set -e; echo " CHECK qt"; dir=""; pkg=""; \
149 pkg-config --exists qt 2> /dev/null && pkg=qt; \
150 pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
151 if [ -n "$$pkg" ]; then \
152 cflags="\$$(shell pkg-config $$pkg --cflags)"; \
153 libs="\$$(shell pkg-config $$pkg --libs)"; \
154 moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
155 dir="$$(pkg-config $$pkg --variable=prefix)"; \
156 else \
157 for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
158 if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
159 done; \
160 if [ -z "$$dir" ]; then \
161 echo "*"; \
162 echo "* Unable to find the QT installation. Please make sure that"; \
163 echo "* the QT development package is correctly installed and"; \
164 echo "* either install pkg-config or set the QTDIR environment"; \
165 echo "* variable to the correct location."; \
166 echo "*"; \
167 false; \
168 fi; \
169 libpath=$$dir/lib; lib=qt; osdir=""; \
170 $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
171 osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
172 test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
173 test -f $$libpath/libqt-mt.so && lib=qt-mt; \
174 cflags="-I$$dir/include"; \
175 libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
176 moc="$$dir/bin/moc"; \
177 fi; \
178 if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
179 echo "*"; \
180 echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
181 echo "*"; \
182 moc="/usr/bin/moc"; \
183 fi; \
184 echo "KC_QT_CFLAGS=$$cflags" > $@; \
185 echo "KC_QT_LIBS=$$libs" >> $@; \
186 echo "KC_QT_MOC=$$moc" >> $@
187 endif
189 $(obj)/gconf.o: $(obj)/.tmp_gtkcheck
191 ifeq ($(gconf-target),1)
192 -include $(obj)/.tmp_gtkcheck
194 # GTK needs some extra effort, too...
195 $(obj)/.tmp_gtkcheck:
196 @if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \
197 if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \
198 touch $@; \
199 else \
200 echo "*"; \
201 echo "* GTK+ is present but version >= 2.0.0 is required."; \
202 echo "*"; \
203 false; \
204 fi \
205 else \
206 echo "*"; \
207 echo "* Unable to find the GTK+ installation. Please make sure that"; \
208 echo "* the GTK+ 2.0 development package is correctly installed..."; \
209 echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \
210 echo "*"; \
211 false; \
212 fi
213 endif
215 $(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c
217 $(obj)/kconfig_load.o: $(obj)/lkc_defs.h
219 $(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h
221 $(obj)/gconf.o: $(obj)/lkc_defs.h
223 $(obj)/%.moc: $(src)/%.h
224 $(KC_QT_MOC) -i $< -o $@
226 $(obj)/lkc_defs.h: $(src)/lkc_proto.h
227 sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'
230 ###
231 # The following requires flex/bison/gperf
232 # By default we use the _shipped versions, uncomment the following line if
233 # you are modifying the flex/bison src.
234 # LKC_GENPARSER := 1
236 ifdef LKC_GENPARSER
238 $(obj)/zconf.tab.c: $(src)/zconf.y
239 $(obj)/lex.zconf.c: $(src)/zconf.l
240 $(obj)/zconf.hash.c: $(src)/zconf.gperf
242 %.tab.c: %.y
243 bison -l -b $* -p $(notdir $*) $<
244 cp $@ $@_shipped
246 lex.%.c: %.l
247 flex -L -P$(notdir $*) -o$@ $<
248 cp $@ $@_shipped
250 %.hash.c: %.gperf
251 gperf < $< > $@
252 cp $@ $@_shipped
254 endif