view arch/um/Kconfig @ 854:950b9eb27661

usbback: fix urb interval value for interrupt urbs.

Signed-off-by: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com>
author Keir Fraser <keir.fraser@citrix.com>
date Mon Apr 06 13:51:20 2009 +0100 (2009-04-06)
parents 3e8752eb6d9c
line source
2 string
3 option defconfig_list
4 default "arch/$ARCH/defconfig"
6 # UML uses the generic IRQ sugsystem
8 bool
9 default y
11 config UML
12 bool
13 default y
15 config MMU
16 bool
17 default y
19 mainmenu "Linux/Usermode Kernel Configuration"
21 config ISA
22 bool
24 config SBUS
25 bool
27 config PCI
28 bool
30 config PCMCIA
31 bool
34 bool
35 default y
37 # Used in kernel/irq/manage.c and include/linux/irq.h
39 bool
40 default y
42 menu "UML-specific options"
44 config MODE_TT
45 bool "Tracing thread support"
46 default n
47 help
48 This option controls whether tracing thread support is compiled
49 into UML. This option is largely obsolete, given that skas0 provides
50 skas security and performance without needing to patch the host.
51 It is safe to say 'N' here.
53 config STATIC_LINK
54 bool "Force a static link"
55 default n
56 depends on !MODE_TT
57 help
58 If CONFIG_MODE_TT is disabled, then this option gives you the ability
59 to force a static link of UML. Normally, if only skas mode is built
60 in to UML, it will be linked as a shared binary. This is inconvenient
61 for use in a chroot jail. So, if you intend to run UML inside a
62 chroot, and you disable CONFIG_MODE_TT, you probably want to say Y
63 here.
66 int "Kernel address space size (in .5G units)"
67 default "1"
68 depends on MODE_TT
69 help
70 This determines the amount of address space that UML will allocate for
71 its own, measured in half Gigabyte units. The default is 1.
72 Change this only if you need to boot UML with an unusually large amount
73 of physical memory.
75 config MODE_SKAS
76 bool "Separate Kernel Address Space support" if MODE_TT
77 default y
78 help
79 This option controls whether skas (separate kernel address space)
80 support is compiled in. If you have applied the skas patch to the
81 host, then you certainly want to say Y here (and consider saying N
82 to CONFIG_MODE_TT). Otherwise, it is safe to say Y. Disabling this
83 option will shrink the UML binary slightly.
85 source "arch/um/Kconfig.arch"
86 source "mm/Kconfig"
89 bool
90 default y
91 depends on MODE_TT || STATIC_LINK
93 config LD_SCRIPT_DYN
94 bool
95 default y
96 depends on !LD_SCRIPT_STATIC
98 config NET
99 bool "Networking support"
100 help
101 Unless you really know what you are doing, you should say Y here.
102 The reason is that some programs need kernel networking support even
103 when running on a stand-alone machine that isn't connected to any
104 other computer. If you are upgrading from an older kernel, you
105 should consider updating your networking tools too because changes
106 in the kernel and the tools often go hand in hand. The tools are
107 contained in the package net-tools, the location and version number
108 of which are given in <file:Documentation/Changes>.
110 For a general introduction to Linux networking, it is highly
111 recommended to read the NET-HOWTO, available from
112 <http://www.tldp.org/docs.html#howto>.
115 source "fs/Kconfig.binfmt"
117 config HOSTFS
118 tristate "Host filesystem"
119 help
120 While the User-Mode Linux port uses its own root file system for
121 booting and normal file access, this module lets the UML user
122 access files stored on the host. It does not require any
123 network connection between the Host and UML. An example use of
124 this might be:
126 mount none /tmp/fromhost -t hostfs -o /tmp/umlshare
128 where /tmp/fromhost is an empty directory inside UML and
129 /tmp/umlshare is a directory on the host with files the UML user
130 wishes to access.
132 For more information, see
133 <http://user-mode-linux.sourceforge.net/hostfs.html>.
135 If you'd like to be able to work with files stored on the host,
136 say Y or M here; otherwise say N.
138 config HPPFS
139 tristate "HoneyPot ProcFS (EXPERIMENTAL)"
140 depends on EXPERIMENTAL
141 help
142 hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc
143 entries to be overridden, removed, or fabricated from the host.
144 Its purpose is to allow a UML to appear to be a physical machine
145 by removing or changing anything in /proc which gives away the
146 identity of a UML.
148 See <http://user-mode-linux.sf.net/hppfs.html> for more information.
150 You only need this if you are setting up a UML honeypot. Otherwise,
151 it is safe to say 'N' here.
153 config MCONSOLE
154 bool "Management console"
155 default y
156 help
157 The user mode linux management console is a low-level interface to
158 the kernel, somewhat like the i386 SysRq interface. Since there is
159 a full-blown operating system running under every user mode linux
160 instance, there is much greater flexibility possible than with the
161 SysRq mechanism.
163 If you answer 'Y' to this option, to use this feature, you need the
164 mconsole client (called uml_mconsole) which is present in CVS in
165 2.4.5-9um and later (path /tools/mconsole), and is also in the
166 distribution RPM package in 2.4.6 and later.
168 It is safe to say 'Y' here.
170 config MAGIC_SYSRQ
171 bool "Magic SysRq key"
172 depends on MCONSOLE
173 ---help---
174 If you say Y here, you will have some control over the system even
175 if the system crashes for example during kernel debugging (e.g., you
176 will be able to flush the buffer cache to disk, reboot the system
177 immediately or dump some status information). A key for each of the
178 possible requests is provided.
180 This is the feature normally accomplished by pressing a key
181 while holding SysRq (Alt+PrintScreen).
183 On UML, this is accomplished by sending a "sysrq" command with
184 mconsole, followed by the letter for the requested command.
186 The keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
187 unless you really know what this hack does.
189 config SMP
190 bool "Symmetric multi-processing support (EXPERIMENTAL)"
191 default n
192 #SMP_BROKEN is for x86_64.
194 help
195 This option enables UML SMP support.
196 It is NOT related to having a real SMP box. Not directly, at least.
198 UML implements virtual SMP by allowing as many processes to run
199 simultaneously on the host as there are virtual processors configured.
201 Obviously, if the host is a uniprocessor, those processes will
202 timeshare, but, inside UML, will appear to be running simultaneously.
203 If the host is a multiprocessor, then UML processes may run
204 simultaneously, depending on the host scheduler.
206 This, however, is supported only in TT mode. So, if you use the SKAS
207 patch on your host, switching to TT mode and enabling SMP usually gives
208 you worse performances.
209 Also, since the support for SMP has been under-developed, there could
210 be some bugs being exposed by enabling SMP.
212 If you don't know what to do, say N.
214 config NR_CPUS
215 int "Maximum number of CPUs (2-32)"
216 range 2 32
217 depends on SMP
218 default "32"
220 config NEST_LEVEL
221 int "Nesting level"
222 default "0"
223 help
224 This is set to the number of layers of UMLs that this UML will be run
225 in. Normally, this is zero, meaning that it will run directly on the
226 host. Setting it to one will build a UML that can run inside a UML
227 that is running on the host. Generally, if you intend this UML to run
228 inside another UML, set CONFIG_NEST_LEVEL to one more than the host
229 UML.
231 Note that if the hosting UML has its CONFIG_KERNEL_HALF_GIGS set to
232 greater than one, then the guest UML should have its CONFIG_NEST_LEVEL
234 Only change this if you are running nested UMLs.
236 config HIGHMEM
237 bool "Highmem support (EXPERIMENTAL)"
238 depends on !64BIT && EXPERIMENTAL
239 default n
240 help
241 This was used to allow UML to run with big amounts of memory.
242 Currently it is unstable, so if unsure say N.
244 To use big amounts of memory, it is recommended to disable TT mode (i.e.
245 CONFIG_MODE_TT) and enable static linking (i.e. CONFIG_STATIC_LINK) -
246 this should allow the guest to use up to 2.75G of memory.
249 int "Kernel stack size order"
250 default 2
251 help
252 This option determines the size of UML kernel stacks. They will
253 be 1 << order pages. The default is OK unless you're running Valgrind
254 on UML, in which case, set this to 3.
257 bool "Real-time Clock"
258 default y
259 help
260 This option makes UML time deltas match wall clock deltas. This should
261 normally be enabled. The exception would be if you are debugging with
262 UML and spend long times with UML stopped at a breakpoint. In this
263 case, when UML is restarted, it will call the timer enough times to make
264 up for the time spent at the breakpoint. This could result in a
265 noticable lag. If this is a problem, then disable this option.
267 endmenu
269 source "init/Kconfig"
271 source "drivers/block/Kconfig"
273 source "arch/um/Kconfig.char"
275 source "drivers/base/Kconfig"
277 source "net/Kconfig"
279 source "arch/um/Kconfig.net"
281 source "drivers/net/Kconfig"
283 source "drivers/connector/Kconfig"
285 source "fs/Kconfig"
287 source "security/Kconfig"
289 source "crypto/Kconfig"
291 source "lib/Kconfig"
293 menu "SCSI support"
294 depends on BROKEN
296 config SCSI
297 tristate "SCSI support"
299 # This gives us free_dma, which scsi.c wants.
300 config GENERIC_ISA_DMA
301 bool
302 depends on SCSI
303 default y
305 source "arch/um/Kconfig.scsi"
307 endmenu
309 source "drivers/md/Kconfig"
311 if BROKEN
312 source "drivers/mtd/Kconfig"
313 endif
315 #This is just to shut up some Kconfig warnings, so no prompt.
316 config INPUT
317 bool
318 default n
320 source "arch/um/Kconfig.debug"