ia64/linux-2.6.18-xen.hg

view Documentation/RCU/torture.txt @ 854:950b9eb27661

usbback: fix urb interval value for interrupt urbs.

Signed-off-by: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com>
author Keir Fraser <keir.fraser@citrix.com>
date Mon Apr 06 13:51:20 2009 +0100 (2009-04-06)
parents 831230e53067
children
line source
1 RCU Torture Test Operation
4 CONFIG_RCU_TORTURE_TEST
6 The CONFIG_RCU_TORTURE_TEST config option is available for all RCU
7 implementations. It creates an rcutorture kernel module that can
8 be loaded to run a torture test. The test periodically outputs
9 status messages via printk(), which can be examined via the dmesg
10 command (perhaps grepping for "torture"). The test is started
11 when the module is loaded, and stops when the module is unloaded.
13 However, actually setting this config option to "y" results in the system
14 running the test immediately upon boot, and ending only when the system
15 is taken down. Normally, one will instead want to build the system
16 with CONFIG_RCU_TORTURE_TEST=m and to use modprobe and rmmod to control
17 the test, perhaps using a script similar to the one shown at the end of
18 this document. Note that you will need CONFIG_MODULE_UNLOAD in order
19 to be able to end the test.
22 MODULE PARAMETERS
24 This module has the following parameters:
26 nreaders This is the number of RCU reading threads supported.
27 The default is twice the number of CPUs. Why twice?
28 To properly exercise RCU implementations with preemptible
29 read-side critical sections.
31 stat_interval The number of seconds between output of torture
32 statistics (via printk()). Regardless of the interval,
33 statistics are printed when the module is unloaded.
34 Setting the interval to zero causes the statistics to
35 be printed -only- when the module is unloaded, and this
36 is the default.
38 shuffle_interval
39 The number of seconds to keep the test threads affinitied
40 to a particular subset of the CPUs. Used in conjunction
41 with test_no_idle_hz.
43 test_no_idle_hz Whether or not to test the ability of RCU to operate in
44 a kernel that disables the scheduling-clock interrupt to
45 idle CPUs. Boolean parameter, "1" to test, "0" otherwise.
47 torture_type The type of RCU to test: "rcu" for the rcu_read_lock()
48 API, "rcu_bh" for the rcu_read_lock_bh() API, and "srcu"
49 for the "srcu_read_lock()" API.
51 verbose Enable debug printk()s. Default is disabled.
54 OUTPUT
56 The statistics output is as follows:
58 rcu-torture: --- Start of test: nreaders=16 stat_interval=0 verbose=0
59 rcu-torture: rtc: 0000000000000000 ver: 1916 tfle: 0 rta: 1916 rtaf: 0 rtf: 1915
60 rcu-torture: Reader Pipe: 1466408 9747 0 0 0 0 0 0 0 0 0
61 rcu-torture: Reader Batch: 1464477 11678 0 0 0 0 0 0 0 0
62 rcu-torture: Free-Block Circulation: 1915 1915 1915 1915 1915 1915 1915 1915 1915 1915 0
63 rcu-torture: --- End of test
65 The command "dmesg | grep torture:" will extract this information on
66 most systems. On more esoteric configurations, it may be necessary to
67 use other commands to access the output of the printk()s used by
68 the RCU torture test. The printk()s use KERN_ALERT, so they should
69 be evident. ;-)
71 The entries are as follows:
73 o "ggp": The number of counter flips (or batches) since boot.
75 o "rtc": The hexadecimal address of the structure currently visible
76 to readers.
78 o "ver": The number of times since boot that the rcutw writer task
79 has changed the structure visible to readers.
81 o "tfle": If non-zero, indicates that the "torture freelist"
82 containing structure to be placed into the "rtc" area is empty.
83 This condition is important, since it can fool you into thinking
84 that RCU is working when it is not. :-/
86 o "rta": Number of structures allocated from the torture freelist.
88 o "rtaf": Number of allocations from the torture freelist that have
89 failed due to the list being empty.
91 o "rtf": Number of frees into the torture freelist.
93 o "Reader Pipe": Histogram of "ages" of structures seen by readers.
94 If any entries past the first two are non-zero, RCU is broken.
95 And rcutorture prints the error flag string "!!!" to make sure
96 you notice. The age of a newly allocated structure is zero,
97 it becomes one when removed from reader visibility, and is
98 incremented once per grace period subsequently -- and is freed
99 after passing through (RCU_TORTURE_PIPE_LEN-2) grace periods.
101 The output displayed above was taken from a correctly working
102 RCU. If you want to see what it looks like when broken, break
103 it yourself. ;-)
105 o "Reader Batch": Another histogram of "ages" of structures seen
106 by readers, but in terms of counter flips (or batches) rather
107 than in terms of grace periods. The legal number of non-zero
108 entries is again two. The reason for this separate view is
109 that it is easier to get the third entry to show up in the
110 "Reader Batch" list than in the "Reader Pipe" list.
112 o "Free-Block Circulation": Shows the number of torture structures
113 that have reached a given point in the pipeline. The first element
114 should closely correspond to the number of structures allocated,
115 the second to the number that have been removed from reader view,
116 and all but the last remaining to the corresponding number of
117 passes through a grace period. The last entry should be zero,
118 as it is only incremented if a torture structure's counter
119 somehow gets incremented farther than it should.
122 USAGE
124 The following script may be used to torture RCU:
126 #!/bin/sh
128 modprobe rcutorture
129 sleep 100
130 rmmod rcutorture
131 dmesg | grep torture:
133 The output can be manually inspected for the error flag of "!!!".
134 One could of course create a more elaborate script that automatically
135 checked for such errors. The "rmmod" command forces a "SUCCESS" or
136 "FAILURE" indication to be printk()ed.