view Documentation/cdrom/gscd @ 524:7f8b544237bf

netfront: Allow netfront in domain 0.

This is useful if your physical network device is in a utility domain.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
author Keir Fraser <keir.fraser@citrix.com>
date Tue Apr 15 15:18:58 2008 +0100 (2008-04-15)
parents 831230e53067
line source
1 Goldstar R420 CD-Rom device driver README
3 For all kind of other information about the GoldStar R420 CDROM
4 and this Linux device driver see the WWW page:
6 http://linux.rz.fh-hannover.de/~raupach
9 If you are the editor of a Linux CD, you should
10 enable gscd.c within your boot floppy kernel. Please,
11 send me one of your CDs for free.
14 This current driver version 0.4a only supports reading data from the disk.
15 Currently we have no audio and no multisession or XA support.
16 The polling interface is used, no DMA.
19 Sometimes the GoldStar R420 is sold in a 'Reveal Multimedia Kit'. This kit's
20 drive interface is compatible, too.
23 Installation
24 ------------
26 Change to '/usr/src/linux/drivers/cdrom' and edit the file 'gscd.h'. Insert
27 the i/o address of your interface card.
29 The default base address is 0x340. This will work for most applications.
30 Address selection is accomplished by jumpers PN801-1 to PN801-4 on the
31 GoldStar Interface Card.
32 Appropriate settings are: 0x300, 0x310, 0x320, 0x330, 0x340, 0x350, 0x360
33 0x370, 0x380, 0x390, 0x3A0, 0x3B0, 0x3C0, 0x3D0, 0x3E0, 0x3F0
35 Then go back to '/usr/src/linux/' and 'make config' to build the new
36 configuration for your kernel. If you want to use the GoldStar driver
37 like a module, don't select 'GoldStar CDROM support'. By the way, you
38 have to include the iso9660 filesystem.
40 Now start compiling the kernel with 'make zImage'.
41 If you want to use the driver as a module, you have to do 'make modules'
42 and 'make modules_install', additionally.
43 Install your new kernel as usual - maybe you do it with 'make zlilo'.
45 Before you can use the driver, you have to
46 mknod /dev/gscd0 b 16 0
47 to create the appropriate device file (you only need to do this once).
49 If you use modules, you can try to insert the driver.
50 Say: 'insmod /usr/src/linux/modules/gscd.o'
51 or: 'insmod /usr/src/linux/modules/gscd.o gscd=<address>'
52 The driver should report its results.
54 That's it! Mount a disk, i.e. 'mount -rt iso9660 /dev/gscd0 /cdrom'
56 Feel free to report errors and suggestions to the following address.
57 Be sure, I'm very happy to receive your comments!
59 Oliver Raupach Hannover, Juni 1995
60 (raupach@nwfs1.rz.fh-hannover.de)