ia64/linux-2.6.18-xen.hg

view arch/sparc/defconfig @ 897:329ea0ccb344

balloon: try harder to balloon up under memory pressure.

Currently if the balloon driver is unable to increase the guest's
reservation it assumes the failure was due to reaching its full
allocation, gives up on the ballooning operation and records the limit
it reached as the "hard limit". The driver will not try again until
the target is set again (even to the same value).

However it is possible that ballooning has in fact failed due to
memory pressure in the host and therefore it is desirable to keep
attempting to reach the target in case memory becomes available. The
most likely scenario is that some guests are ballooning down while
others are ballooning up and therefore there is temporary memory
pressure while things stabilise. You would not expect a well behaved
toolstack to ask a domain to balloon to more than its allocation nor
would you expect it to deliberately over-commit memory by setting
balloon targets which exceed the total host memory.

This patch drops the concept of a hard limit and causes the balloon
driver to retry increasing the reservation on a timer in the same
manner as when decreasing the reservation.

Also if we partially succeed in increasing the reservation
(i.e. receive less pages than we asked for) then we may as well keep
those pages rather than returning them to Xen.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
author Keir Fraser <keir.fraser@citrix.com>
date Fri Jun 05 14:01:20 2009 +0100 (2009-06-05)
parents 831230e53067
children
line source
1 #
2 # Automatically generated make config: don't edit
3 #
4 CONFIG_MMU=y
5 CONFIG_UID16=y
6 CONFIG_HIGHMEM=y
7 CONFIG_GENERIC_ISA_DMA=y
9 #
10 # Code maturity level options
11 #
12 CONFIG_EXPERIMENTAL=y
13 CONFIG_CLEAN_COMPILE=y
14 CONFIG_STANDALONE=y
15 CONFIG_BROKEN_ON_SMP=y
17 #
18 # General setup
19 #
20 CONFIG_SWAP=y
21 CONFIG_SYSVIPC=y
22 CONFIG_POSIX_MQUEUE=y
23 # CONFIG_BSD_PROCESS_ACCT is not set
24 CONFIG_SYSCTL=y
25 # CONFIG_AUDIT is not set
26 CONFIG_LOG_BUF_SHIFT=14
27 # CONFIG_HOTPLUG is not set
28 # CONFIG_IKCONFIG is not set
29 # CONFIG_EMBEDDED is not set
30 CONFIG_KALLSYMS=y
31 # CONFIG_KALLSYMS_ALL is not set
32 CONFIG_FUTEX=y
33 CONFIG_EPOLL=y
34 CONFIG_IOSCHED_NOOP=y
35 CONFIG_IOSCHED_AS=y
36 CONFIG_IOSCHED_DEADLINE=y
37 CONFIG_IOSCHED_CFQ=y
38 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
40 #
41 # Loadable module support
42 #
43 CONFIG_MODULES=y
44 CONFIG_MODULE_UNLOAD=y
45 # CONFIG_MODULE_FORCE_UNLOAD is not set
46 CONFIG_OBSOLETE_MODPARM=y
47 # CONFIG_MODVERSIONS is not set
48 CONFIG_KMOD=y
50 #
51 # General setup
52 #
53 CONFIG_VT=y
54 CONFIG_VT_CONSOLE=y
55 CONFIG_HW_CONSOLE=y
56 # CONFIG_SMP is not set
57 CONFIG_SPARC32=y
58 CONFIG_SBUS=y
59 CONFIG_SBUSCHAR=y
60 CONFIG_SERIAL_CONSOLE=y
61 CONFIG_SUN_AUXIO=y
62 CONFIG_SUN_IO=y
63 CONFIG_RWSEM_GENERIC_SPINLOCK=y
64 CONFIG_SUN_PM=y
65 # CONFIG_SUN4 is not set
66 CONFIG_PCI=y
67 # CONFIG_PCI_LEGACY_PROC is not set
68 # CONFIG_PCI_NAMES is not set
69 CONFIG_SUN_OPENPROMFS=m
70 CONFIG_BINFMT_ELF=y
71 CONFIG_BINFMT_AOUT=y
72 CONFIG_BINFMT_MISC=m
73 CONFIG_SUNOS_EMUL=y
75 #
76 # Parallel port support
77 #
78 # CONFIG_PARPORT is not set
80 #
81 # Generic Driver Options
82 #
83 # CONFIG_DEBUG_DRIVER is not set
85 #
86 # Graphics support
87 #
88 # CONFIG_FB is not set
90 #
91 # Console display driver support
92 #
93 # CONFIG_MDA_CONSOLE is not set
94 # CONFIG_PROM_CONSOLE is not set
95 CONFIG_DUMMY_CONSOLE=y
97 #
98 # Memory Technology Devices (MTD)
99 #
100 # CONFIG_MTD is not set
102 #
103 # Serial drivers
104 #
105 # CONFIG_SERIAL_8250 is not set
107 #
108 # Non-8250 serial port support
109 #
110 CONFIG_SERIAL_SUNCORE=y
111 CONFIG_SERIAL_SUNZILOG=y
112 CONFIG_SERIAL_SUNZILOG_CONSOLE=y
113 CONFIG_SERIAL_SUNSU=y
114 CONFIG_SERIAL_SUNSU_CONSOLE=y
115 # CONFIG_SERIAL_SUNSAB is not set
116 CONFIG_SERIAL_CORE=y
117 CONFIG_SERIAL_CORE_CONSOLE=y
119 #
120 # Misc Linux/SPARC drivers
121 #
122 CONFIG_SUN_OPENPROMIO=m
123 CONFIG_SUN_MOSTEK_RTC=m
124 # CONFIG_SUN_BPP is not set
125 # CONFIG_SUN_VIDEOPIX is not set
126 # CONFIG_SUN_AURORA is not set
127 # CONFIG_TADPOLE_TS102_UCTRL is not set
128 # CONFIG_SUN_JSFLASH is not set
129 CONFIG_APM_RTC_IS_GMT=y
130 CONFIG_RTC=m
132 #
133 # Block devices
134 #
135 # CONFIG_BLK_DEV_FD is not set
136 # CONFIG_BLK_CPQ_DA is not set
137 # CONFIG_BLK_CPQ_CISS_DA is not set
138 # CONFIG_BLK_DEV_DAC960 is not set
139 # CONFIG_BLK_DEV_UMEM is not set
140 CONFIG_BLK_DEV_LOOP=m
141 CONFIG_BLK_DEV_CRYPTOLOOP=m
142 # CONFIG_BLK_DEV_NBD is not set
143 # CONFIG_BLK_DEV_CARMEL is not set
144 CONFIG_BLK_DEV_RAM=y
145 CONFIG_BLK_DEV_RAM_SIZE=4096
146 CONFIG_BLK_DEV_INITRD=y
148 #
149 # ATA/ATAPI/MFM/RLL support
150 #
151 # CONFIG_IDE is not set
153 #
154 # ISDN subsystem
155 #
156 # CONFIG_ISDN is not set
158 #
159 # SCSI device support
160 #
161 CONFIG_SCSI=y
162 CONFIG_SCSI_PROC_FS=y
164 #
165 # SCSI support type (disk, tape, CD-ROM)
166 #
167 CONFIG_BLK_DEV_SD=y
168 # CONFIG_CHR_DEV_ST is not set
169 # CONFIG_CHR_DEV_OSST is not set
170 CONFIG_BLK_DEV_SR=m
171 # CONFIG_BLK_DEV_SR_VENDOR is not set
172 CONFIG_CHR_DEV_SG=m
174 #
175 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
176 #
177 # CONFIG_SCSI_MULTI_LUN is not set
178 # CONFIG_SCSI_CONSTANTS is not set
179 # CONFIG_SCSI_LOGGING is not set
181 #
182 # SCSI Transport Attributes
183 #
184 CONFIG_SCSI_SPI_ATTRS=m
185 # CONFIG_SCSI_FC_ATTRS is not set
187 #
188 # SCSI low-level drivers
189 #
190 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
191 # CONFIG_SCSI_ACARD is not set
192 # CONFIG_SCSI_AACRAID is not set
193 # CONFIG_SCSI_AIC7XXX is not set
194 # CONFIG_SCSI_AIC7XXX_OLD is not set
195 # CONFIG_SCSI_AIC79XX is not set
196 # CONFIG_SCSI_DPT_I2O is not set
197 # CONFIG_SCSI_ADVANSYS is not set
198 # CONFIG_SCSI_MEGARAID is not set
199 # CONFIG_SCSI_SATA is not set
200 # CONFIG_SCSI_BUSLOGIC is not set
201 # CONFIG_SCSI_DMX3191D is not set
202 # CONFIG_SCSI_EATA is not set
203 # CONFIG_SCSI_EATA_PIO is not set
204 # CONFIG_SCSI_FUTURE_DOMAIN is not set
205 # CONFIG_SCSI_GDTH is not set
206 # CONFIG_SCSI_IPS is not set
207 # CONFIG_SCSI_INIA100 is not set
208 # CONFIG_SCSI_SYM53C8XX_2 is not set
209 # CONFIG_SCSI_IPR is not set
210 # CONFIG_SCSI_QLOGIC_ISP is not set
211 # CONFIG_SCSI_QLOGIC_FC is not set
212 # CONFIG_SCSI_QLOGIC_1280 is not set
213 CONFIG_SCSI_QLOGICPTI=m
214 CONFIG_SCSI_QLA2XXX=y
215 # CONFIG_SCSI_QLA21XX is not set
216 # CONFIG_SCSI_QLA22XX is not set
217 # CONFIG_SCSI_QLA2300 is not set
218 # CONFIG_SCSI_QLA2322 is not set
219 # CONFIG_SCSI_QLA6312 is not set
220 # CONFIG_SCSI_QLA6322 is not set
221 # CONFIG_SCSI_DC395x is not set
222 # CONFIG_SCSI_DC390T is not set
223 # CONFIG_SCSI_NSP32 is not set
224 # CONFIG_SCSI_DEBUG is not set
225 CONFIG_SCSI_SUNESP=y
227 #
228 # Fibre Channel support
229 #
230 # CONFIG_FC4 is not set
232 #
233 # Multi-device support (RAID and LVM)
234 #
235 # CONFIG_MD is not set
237 #
238 # Networking support
239 #
240 CONFIG_NET=y
242 #
243 # Networking options
244 #
245 CONFIG_PACKET=y
246 # CONFIG_PACKET_MMAP is not set
247 CONFIG_NETLINK_DEV=y
248 CONFIG_UNIX=y
249 CONFIG_NET_KEY=m
250 CONFIG_INET=y
251 # CONFIG_IP_MULTICAST is not set
252 # CONFIG_IP_ADVANCED_ROUTER is not set
253 CONFIG_IP_PNP=y
254 CONFIG_IP_PNP_DHCP=y
255 # CONFIG_IP_PNP_BOOTP is not set
256 # CONFIG_IP_PNP_RARP is not set
257 # CONFIG_NET_IPIP is not set
258 # CONFIG_NET_IPGRE is not set
259 # CONFIG_ARPD is not set
260 # CONFIG_SYN_COOKIES is not set
261 CONFIG_INET_AH=y
262 CONFIG_INET_ESP=y
263 CONFIG_INET_IPCOMP=y
264 CONFIG_IPV6=m
265 CONFIG_IPV6_PRIVACY=y
266 CONFIG_INET6_AH=m
267 CONFIG_INET6_ESP=m
268 CONFIG_INET6_IPCOMP=m
269 CONFIG_IPV6_TUNNEL=m
270 # CONFIG_NETFILTER is not set
271 CONFIG_XFRM=y
272 CONFIG_XFRM_USER=m
274 #
275 # SCTP Configuration (EXPERIMENTAL)
276 #
277 CONFIG_IP_SCTP=m
278 # CONFIG_SCTP_DBG_MSG is not set
279 CONFIG_SCTP_DBG_OBJCNT=y
280 # CONFIG_SCTP_HMAC_NONE is not set
281 # CONFIG_SCTP_HMAC_SHA1 is not set
282 CONFIG_SCTP_HMAC_MD5=y
283 # CONFIG_ATM is not set
284 # CONFIG_BRIDGE is not set
285 # CONFIG_VLAN_8021Q is not set
286 # CONFIG_DECNET is not set
287 # CONFIG_LLC2 is not set
288 # CONFIG_IPX is not set
289 # CONFIG_ATALK is not set
290 # CONFIG_X25 is not set
291 # CONFIG_LAPB is not set
292 # CONFIG_NET_DIVERT is not set
293 # CONFIG_ECONET is not set
294 # CONFIG_WAN_ROUTER is not set
295 # CONFIG_NET_HW_FLOWCONTROL is not set
297 #
298 # QoS and/or fair queueing
299 #
300 # CONFIG_NET_SCHED is not set
302 #
303 # Network testing
304 #
305 CONFIG_NET_PKTGEN=m
306 # CONFIG_NETPOLL is not set
307 # CONFIG_NET_POLL_CONTROLLER is not set
308 # CONFIG_HAMRADIO is not set
309 # CONFIG_IRDA is not set
310 # CONFIG_BT is not set
311 CONFIG_NETDEVICES=y
312 CONFIG_DUMMY=m
313 # CONFIG_BONDING is not set
314 # CONFIG_EQUALIZER is not set
315 CONFIG_TUN=m
316 # CONFIG_ETHERTAP is not set
318 #
319 # ARCnet devices
320 #
321 # CONFIG_ARCNET is not set
323 #
324 # Ethernet (10 or 100Mbit)
325 #
326 CONFIG_NET_ETHERNET=y
327 CONFIG_MII=m
328 CONFIG_SUNLANCE=y
329 CONFIG_HAPPYMEAL=m
330 CONFIG_SUNBMAC=m
331 CONFIG_SUNQE=m
332 # CONFIG_SUNGEM is not set
333 # CONFIG_NET_VENDOR_3COM is not set
335 #
336 # Tulip family network device support
337 #
338 # CONFIG_NET_TULIP is not set
339 # CONFIG_HP100 is not set
340 # CONFIG_NET_PCI is not set
342 #
343 # Ethernet (1000 Mbit)
344 #
345 # CONFIG_ACENIC is not set
346 # CONFIG_DL2K is not set
347 # CONFIG_E1000 is not set
348 # CONFIG_MYRI_SBUS is not set
349 # CONFIG_NS83820 is not set
350 # CONFIG_HAMACHI is not set
351 # CONFIG_YELLOWFIN is not set
352 # CONFIG_R8169 is not set
353 # CONFIG_SK98LIN is not set
354 # CONFIG_TIGON3 is not set
356 #
357 # Ethernet (10000 Mbit)
358 #
359 # CONFIG_IXGB is not set
360 # CONFIG_S2IO is not set
362 #
363 # Token Ring devices
364 #
365 # CONFIG_TR is not set
367 #
368 # Wireless LAN (non-hamradio)
369 #
370 # CONFIG_NET_RADIO is not set
372 #
373 # Wan interfaces
374 #
375 # CONFIG_WAN is not set
376 # CONFIG_FDDI is not set
377 # CONFIG_HIPPI is not set
378 # CONFIG_PPP is not set
379 # CONFIG_SLIP is not set
380 # CONFIG_NET_FC is not set
381 # CONFIG_SHAPER is not set
382 # CONFIG_NETCONSOLE is not set
384 #
385 # Unix98 PTY support
386 #
387 CONFIG_UNIX98_PTYS=y
388 CONFIG_UNIX98_PTY_COUNT=256
390 #
391 # Input device support
392 #
393 CONFIG_INPUT=y
395 #
396 # Userland interfaces
397 #
398 CONFIG_INPUT_MOUSEDEV=y
399 CONFIG_INPUT_MOUSEDEV_PSAUX=y
400 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
401 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
402 CONFIG_INPUT_JOYDEV=m
403 # CONFIG_INPUT_TSDEV is not set
404 CONFIG_INPUT_EVDEV=m
405 CONFIG_INPUT_EVBUG=m
407 #
408 # Input I/O drivers
409 #
410 # CONFIG_GAMEPORT is not set
411 CONFIG_SOUND_GAMEPORT=y
412 CONFIG_SERIO=m
413 # CONFIG_SERIO_I8042 is not set
414 CONFIG_SERIO_SERPORT=m
415 # CONFIG_SERIO_CT82C710 is not set
416 # CONFIG_SERIO_PCIPS2 is not set
418 #
419 # Input Device Drivers
420 #
421 CONFIG_INPUT_KEYBOARD=y
422 CONFIG_KEYBOARD_ATKBD=m
423 CONFIG_KEYBOARD_SUNKBD=m
424 # CONFIG_KEYBOARD_LKKBD is not set
425 # CONFIG_KEYBOARD_XTKBD is not set
426 # CONFIG_KEYBOARD_NEWTON is not set
427 CONFIG_INPUT_MOUSE=y
428 CONFIG_MOUSE_PS2=m
429 CONFIG_MOUSE_SERIAL=m
430 # CONFIG_MOUSE_VSXXXAA is not set
431 # CONFIG_INPUT_JOYSTICK is not set
432 # CONFIG_INPUT_TOUCHSCREEN is not set
433 # CONFIG_INPUT_MISC is not set
435 #
436 # File systems
437 #
438 CONFIG_EXT2_FS=y
439 CONFIG_EXT2_FS_XATTR=y
440 CONFIG_EXT2_FS_POSIX_ACL=y
441 CONFIG_EXT2_FS_SECURITY=y
442 # CONFIG_EXT3_FS is not set
443 # CONFIG_JBD is not set
444 CONFIG_FS_MBCACHE=y
445 # CONFIG_REISERFS_FS is not set
446 # CONFIG_JFS_FS is not set
447 CONFIG_FS_POSIX_ACL=y
448 CONFIG_XFS_FS=m
449 CONFIG_XFS_RT=y
450 CONFIG_XFS_QUOTA=y
451 CONFIG_XFS_SECURITY=y
452 CONFIG_XFS_POSIX_ACL=y
453 # CONFIG_MINIX_FS is not set
454 CONFIG_ROMFS_FS=m
455 # CONFIG_QUOTA is not set
456 CONFIG_QUOTACTL=y
457 CONFIG_AUTOFS_FS=m
458 CONFIG_AUTOFS4_FS=m
460 #
461 # CD-ROM/DVD Filesystems
462 #
463 CONFIG_ISO9660_FS=m
464 # CONFIG_JOLIET is not set
465 # CONFIG_ZISOFS is not set
466 # CONFIG_UDF_FS is not set
468 #
469 # DOS/FAT/NT Filesystems
470 #
471 # CONFIG_FAT_FS is not set
472 # CONFIG_NTFS_FS is not set
474 #
475 # Pseudo filesystems
476 #
477 CONFIG_PROC_FS=y
478 CONFIG_PROC_KCORE=y
479 CONFIG_SYSFS=y
480 # CONFIG_DEVFS_FS is not set
481 CONFIG_DEVPTS_FS_XATTR=y
482 # CONFIG_DEVPTS_FS_SECURITY is not set
483 # CONFIG_TMPFS is not set
484 # CONFIG_HUGETLB_PAGE is not set
485 CONFIG_RAMFS=y
487 #
488 # Miscellaneous filesystems
489 #
490 # CONFIG_ADFS_FS is not set
491 # CONFIG_AFFS_FS is not set
492 # CONFIG_HFS_FS is not set
493 # CONFIG_HFSPLUS_FS is not set
494 CONFIG_BEFS_FS=m
495 # CONFIG_BEFS_DEBUG is not set
496 # CONFIG_BFS_FS is not set
497 # CONFIG_EFS_FS is not set
498 # CONFIG_CRAMFS is not set
499 # CONFIG_VXFS_FS is not set
500 # CONFIG_HPFS_FS is not set
501 # CONFIG_QNX4FS_FS is not set
502 # CONFIG_SYSV_FS is not set
503 # CONFIG_UFS_FS is not set
505 #
506 # Network File Systems
507 #
508 CONFIG_NFS_FS=y
509 # CONFIG_NFS_V3 is not set
510 # CONFIG_NFS_V4 is not set
511 # CONFIG_NFS_DIRECTIO is not set
512 # CONFIG_NFSD is not set
513 CONFIG_ROOT_NFS=y
514 CONFIG_LOCKD=y
515 # CONFIG_EXPORTFS is not set
516 CONFIG_SUNRPC=y
517 CONFIG_SUNRPC_GSS=m
518 CONFIG_RPCSEC_GSS_KRB5=m
519 # CONFIG_SMB_FS is not set
520 CONFIG_CIFS=m
521 # CONFIG_CIFS_STATS is not set
522 # CONFIG_NCP_FS is not set
523 # CONFIG_CODA_FS is not set
524 CONFIG_AFS_FS=m
525 CONFIG_RXRPC=m
527 #
528 # Partition Types
529 #
530 # CONFIG_PARTITION_ADVANCED is not set
531 CONFIG_MSDOS_PARTITION=y
532 CONFIG_SUN_PARTITION=y
534 #
535 # Native Language Support
536 #
537 CONFIG_NLS=y
538 CONFIG_NLS_DEFAULT="iso8859-1"
539 # CONFIG_NLS_CODEPAGE_437 is not set
540 # CONFIG_NLS_CODEPAGE_737 is not set
541 # CONFIG_NLS_CODEPAGE_775 is not set
542 # CONFIG_NLS_CODEPAGE_850 is not set
543 # CONFIG_NLS_CODEPAGE_852 is not set
544 # CONFIG_NLS_CODEPAGE_855 is not set
545 # CONFIG_NLS_CODEPAGE_857 is not set
546 # CONFIG_NLS_CODEPAGE_860 is not set
547 # CONFIG_NLS_CODEPAGE_861 is not set
548 # CONFIG_NLS_CODEPAGE_862 is not set
549 # CONFIG_NLS_CODEPAGE_863 is not set
550 # CONFIG_NLS_CODEPAGE_864 is not set
551 # CONFIG_NLS_CODEPAGE_865 is not set
552 # CONFIG_NLS_CODEPAGE_866 is not set
553 # CONFIG_NLS_CODEPAGE_869 is not set
554 # CONFIG_NLS_CODEPAGE_936 is not set
555 # CONFIG_NLS_CODEPAGE_950 is not set
556 # CONFIG_NLS_CODEPAGE_932 is not set
557 # CONFIG_NLS_CODEPAGE_949 is not set
558 # CONFIG_NLS_CODEPAGE_874 is not set
559 # CONFIG_NLS_ISO8859_8 is not set
560 # CONFIG_NLS_CODEPAGE_1250 is not set
561 # CONFIG_NLS_CODEPAGE_1251 is not set
562 # CONFIG_NLS_ISO8859_1 is not set
563 # CONFIG_NLS_ISO8859_2 is not set
564 # CONFIG_NLS_ISO8859_3 is not set
565 # CONFIG_NLS_ISO8859_4 is not set
566 # CONFIG_NLS_ISO8859_5 is not set
567 # CONFIG_NLS_ISO8859_6 is not set
568 # CONFIG_NLS_ISO8859_7 is not set
569 # CONFIG_NLS_ISO8859_9 is not set
570 # CONFIG_NLS_ISO8859_13 is not set
571 # CONFIG_NLS_ISO8859_14 is not set
572 # CONFIG_NLS_ISO8859_15 is not set
573 # CONFIG_NLS_KOI8_R is not set
574 # CONFIG_NLS_KOI8_U is not set
575 # CONFIG_NLS_UTF8 is not set
577 #
578 # Sound
579 #
580 # CONFIG_SOUND is not set
582 #
583 # USB support
584 #
585 # CONFIG_USB is not set
587 #
588 # USB Gadget Support
589 #
590 # CONFIG_USB_GADGET is not set
592 #
593 # Watchdog Cards
594 #
595 # CONFIG_WATCHDOG is not set
597 #
598 # Kernel hacking
599 #
600 CONFIG_DEBUG_KERNEL=y
601 # CONFIG_DEBUG_STACK_USAGE is not set
602 # CONFIG_DEBUG_SLAB is not set
603 CONFIG_MAGIC_SYSRQ=y
604 # CONFIG_DEBUG_SPINLOCK is not set
605 # CONFIG_DEBUG_HIGHMEM is not set
606 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
607 # CONFIG_DEBUG_BUGVERBOSE is not set
609 #
610 # Security options
611 #
612 # CONFIG_SECURITY is not set
614 #
615 # Cryptographic options
616 #
617 CONFIG_CRYPTO=y
618 CONFIG_CRYPTO_HMAC=y
619 CONFIG_CRYPTO_NULL=m
620 CONFIG_CRYPTO_MD4=y
621 CONFIG_CRYPTO_MD5=y
622 CONFIG_CRYPTO_SHA1=y
623 CONFIG_CRYPTO_SHA256=m
624 CONFIG_CRYPTO_SHA512=m
625 CONFIG_CRYPTO_DES=y
626 CONFIG_CRYPTO_BLOWFISH=m
627 CONFIG_CRYPTO_TWOFISH=m
628 CONFIG_CRYPTO_SERPENT=m
629 CONFIG_CRYPTO_AES=m
630 CONFIG_CRYPTO_CAST5=m
631 CONFIG_CRYPTO_CAST6=m
632 CONFIG_CRYPTO_ARC4=m
633 CONFIG_CRYPTO_DEFLATE=y
634 CONFIG_CRYPTO_MICHAEL_MIC=m
635 CONFIG_CRYPTO_CRC32C=m
636 # CONFIG_CRYPTO_TEST is not set
638 #
639 # Library routines
640 #
641 CONFIG_CRC32=y
642 CONFIG_LIBCRC32C=m
643 CONFIG_ZLIB_INFLATE=y
644 CONFIG_ZLIB_DEFLATE=y